Bid packages and deliverables
Industrial and warehouse packages
Slabs, tilt-up or precast panels, steel frames, cladding and hardstand are measured as separate packages so supplier quotes compare against the same scope. Site works and external services stay apart from the building.
Commercial estimating Multi-residential and commercial fit-out
Repeated apartment or tenancy types are measured once and multiplied, with common areas, podium levels and basement structure kept separate. A finish or layout change to one type then reprices cleanly.
Drywall takeoff scope Bill of quantities cross-check
If a consultant QS has issued a bill, we check quantities against the drawings and report missing, duplicated or superseded items by item number, giving your estimator a clean query list for the tender period.
Quantity takeoff deliverables Concrete slabs and tilt panels
Slab area, thickness, edge beams and thickenings are measured from the structural drawings, with panels taken net of openings. Concrete is in cubic metres and reinforcement in tonnes, with joints, inserts and lifting items on their own lines.
Concrete estimating Structural steel and metalwork
Members, bracing, purlins and connections are separated so fabrication, galvanising and erection allowances are visible when supplier quotes are compared. Miscellaneous metals stay on their own lines.
Structural steel estimating Plasterboard, ceilings and partitions
Walls are split by type, height and rating, with framing, linings, insulation and ceilings counted separately. Bulkheads, shafts and set-downs are listed so they are not hidden inside a rate per square metre.
Drywall estimating The written quote confirms the included trades, output, fee and delivery date. For multi-package tenders, tell us whether you need one consolidated workbook or separate returns by trade, building or tender lot.
Warehouse tender scope check
Before pricing an Australian warehouse, confirm the structural and architectural drawing issues, the geotechnical report, and what is included in the head contractor's preliminaries. Check slab thickness and finish, panel openings, hardstand extent, and who supplies services and fire systems. Confirm the contract form, security-of-payment obligations in the state, and the tender close time with its time zone.
Illustrative warehouse slab and tilt-panel rollup | Scope | Example input | Workbook entry |
| Ground slab | 60 m × 40 m × 0.2 m | 480 m³ of slab concrete before waste. |
|---|
| Edge thickenings | 200 m perimeter × 0.4 m × 0.3 m | 24 m³ of additional concrete in the thickenings. |
|---|
| Tilt panels | 200 m perimeter × 9 m high = 1,800 m² less 150 m² of door openings | 1,650 m² of net panel area, with panel marks and openings listed separately. |
The quantities are illustrative. Use the current tender documents and agreed scope to prepare your bid.
Return quantities by element, with drawing issue, thickness, panel schedule and measurement basis identified on every sheet.
The code behind the quantities: the NCC and state variations
Australia's technical building requirements sit in the National Construction Code, produced and maintained by the Australian Building Codes Board on behalf of the federal, state and territory governments. The Building Code of Australia is Volumes One and Two, covering Class 2 to 9 buildings and Class 1 and 10 buildings respectively, and the Plumbing Code of Australia is Volume Three.
NCC 2022 was adopted by the states and territories on 1 May 2023, and the ABCB's edition page notes that Amendment 2 superseded Amendment 1 from 29 July 2025. States and territories can add variations, so the edition and variations that bind a tender are the ones in force where the site is. We measure to what the tender documents and permit cite and flag items that appear to depend on a code change.
Measurement rules: ANZSMM and consultant bills
Australian bills of quantities are commonly prepared to the Australian and New Zealand Standard Method of Measurement of Building Works, published by the Australian Institute of Quantity Surveyors. It gives a uniform basis for measuring building works so that tenderers price the same thing.
If your tender bill cites the ANZSMM or a bespoke method, tell us when you send the package and the workbook follows it. Where there is no stated method, we list the assumptions used so your estimator can adjust them before pricing.
GST, contracts and security of payment
Tender pricing in Australia is usually stated either including or excluding GST, so the workbook keeps GST on a separate line and the quote confirms which basis it uses. Whether and how GST applies to your supply is a tax matter for your accountant.
Many projects use the AS 4000 family of contracts or a bespoke head contract, and each state has its own security-of-payment regime. We measure to the documents in the pack and flag exclusions, provisional sums or clauses that appear to move quantity risk onto the bidder.
Frequently asked questions
Do you measure to the ANZSMM?
Yes, when your tender bill or client specifies it. Tell us at the start and the workbook follows the stated method. If none is stated we list our measurement assumptions.
Are you a registered quantity surveying practice?
No. F&K is a remote US-based estimating team. We produce measured quantities and priced estimates for your bid, but if a client or contract needs a professional QS to certify a bill, that stays with your own surveyor.
Which NCC edition do you work to?
The edition your tender documents and permit cite, with any state or territory variations they reference. We do not assume a code edition silently; we state it in the workbook.
Can you price in Australian dollars, with GST shown separately?
Yes. The workbook carries AUD pricing inputs for the agreed scope and shows GST on its own line. Rates come from your supplier quotations or the pricing basis agreed in the written quote.
What do you need from me, and how fast is the return?
Send the drawings, specification, any issued bill, the state, the trades to price and the tender close time. Typical turnaround is 24-48 hours once the package is complete, confirmed in the written quote.
Browse estimating services and trades
Find the drawings, quantities and deliverables for your scope. For a Australia project, share your bid documents so we can confirm which items belong in the quote.
Estimating services
Trade estimating and takeoffs