F&K Estimatings Construction Estimating & Takeoffs

Lincoln, Nebraska · Remote estimating support

Construction Estimating Company in Lincoln, NE

F&K prepares priced construction estimates for Lincoln contractors bidding residential and commercial work: quantities by CSI division, material, labor and equipment pricing, and a summary that states the assumptions and exclusions openly. Send the drawing set and we will build the estimate from your documents, with alternates and allowances kept visible. Share the scope, drawing issue and bid date, and we will answer with a written quote that fixes the fee and delivery date up front.

Send plans for a scope quote

Project context and local references

Lincoln permits are handled by the City's Department of Building and Safety, which takes applications online through permits.lincoln.ne.gov — the portal moved onto the Accela system during 2026. The codes in force are the 2021 editions across the board: the City Council adopted the 2021 IRC, IBC, IEBC, IMC, IFGC and Uniform Plumbing Code together with the 2023 NEC, with the electrical changes effective December 30, 2025 and everything else effective January 30, 2026; the 2018 energy code, adopted in 2020, still governs efficiency, and the state baseline beneath it is the 2018 IBC and IRC. Lincoln sits in climate zone 5A, with cold winters, snow, hot summers and regular hail and tornado exposure — impact-rated roofing and snow-load framing belong in the estimate, not in a contingency line. For labor cost, the Bureau of Labor Statistics reports May 2025 mean hourly wages for the Lincoln metro of $37.18 for cost estimators (OEWS series OEUM003070000000013105103) and $23.01 for construction laborers (OEUM003070000000047206103). Census permit data for 2025 shows 2,215 homes authorized in the city, worth $475.7 million — 859 single-family homes and 1,352 units in buildings of five or more, so about 61% of new homes are multifamily.

price your Lincoln bid

Hypothetical worked example · not a client project or market quotation

Picture a hypothetical 20-unit apartment building on Lincoln's east side. With roughly 61% of the city's newly permitted homes in buildings of five or more units, multifamily work of this kind is the typical Lincoln pipeline job, not the exception — shared walls, stacked plumbing and repeated unit layouts drive the quantities. Suppose the estimate takes 46 hours of measuring and pricing. At the metro mean of $37.18 an hour for cost estimators, the estimating labor alone comes to about $1,710; the laborer rate of $23.01 an hour then anchors the installation side, where crew hours for framing, drywall and rough-ins are priced from the same measured quantities.

Review before pricing

Before pricing starts, we check which code edition the drawings were designed to. A set issued in late 2025 may still follow the earlier codes, while a permit filed after January 30, 2026 is judged against the 2021 editions — that gap changes quantities in the envelope, mechanical and plumbing divisions, and we flag it rather than price both ways silently. We reconcile the sheet index with the addenda, confirm the bid form's breakdown, and look for the Lincoln items that most often slip through: hail-rated roofing alternates, snow-load framing at roof steps, and sidewalk or curb-cut work documented apart from the building plans.

Documents and requested output

Send the full drawing set — architectural, structural, MEP and civil sheets where they apply — with the specifications or a scope narrative, the project address, the bid date and the delivery format you need. Note the trades to be priced, any alternates, and whether the job is public or private. Back from us comes a division-by-division estimate with quantities, material, labor and equipment pricing, the assumptions and exclusions listed, and markups showing what was measured.

What to confirm before comparing bids

Before the bid is submitted, confirm the estimate's code basis matches the permit timing — a January 2026 filing sits on a different edition than a December one. Check that hail-rated roofing is priced as specified rather than as a standard shingle, that alternates sit apart from the base bid, and that the multifamily unit count matches the latest addendum. If the city has issued review comments since the estimate was built, send them in for re-pricing before the deadline.

Scope checklist

  • Full drawing set: architectural, structural, MEP and civil sheets as applicable
  • Specifications or a scope narrative for the work
  • Project address, bid date and required delivery format
  • Current addenda and the drawing issue being priced
  • Trades to be priced, alternates and the bid-form breakdown
  • Public or private funding for the job
  • City review comments or portal correspondence that changes scope

Source documents for project review

Local references checked . Confirm the current requirements with the project team and relevant authority.

Questions for this estimating scope

What information helps us price your Lincoln bid?

Send the full drawing set — architectural, structural, MEP and civil sheets where they apply — with the specifications or a scope narrative, the project address, the bid date and the delivery format you need. Note the trades to be priced, any alternates, and whether the job is public or private. Back from us comes a division-by-division estimate with quantities, material, labor and equipment pricing, the assumptions and exclusions listed, and markups showing what was measured.

What needs review before this scope is priced?

Before pricing starts, we check which code edition the drawings were designed to. A set issued in late 2025 may still follow the earlier codes, while a permit filed after January 30, 2026 is judged against the 2021 editions — that gap changes quantities in the envelope, mechanical and plumbing divisions, and we flag it rather than price both ways silently. We reconcile the sheet index with the addenda, confirm the bid form's breakdown, and look for the Lincoln items that most often slip through: hail-rated roofing alternates, snow-load framing at roof steps, and sidewalk or curb-cut work documented apart from the building plans.

Discuss your Lincoln project scope

Request a quote for paid estimating or quantity takeoff services. Share your trade scope, project location and bid deadline. We confirm the fee and deliverables before work starts. Fields marked * are required.

Contact and project details
Choose your phone country and enter your local number. Or enter a full number starting with + and its country code, regardless of the country selected.

Project Drawings (optional)

PDF, CAD/BIM, Office, ZIP or image documents. Up to 5 files, 25 MB each; account limits also apply.

No drawings attached. This field is optional.

    Already have a sharing link? Paste it here instead of uploading. Grant access to info@fandkestimatings.us; do not include passwords.

    Upload only documents you are authorized to share. Privacy policy. This request does not opt you into marketing messages.

    Prefer to discuss the scope first, or having trouble with the form? Email your project details or discuss your project on WhatsApp. Include your project location, trade scope and bid deadline.