F&K Estimatings Construction Estimating & Takeoffs

Canada tender estimating

MEP Estimating Services for Canadian Multi-Unit and Commercial Projects

Canadian MEP packages split naturally into parkade services, corridor distribution and in-suite work. F&K prepares remote MEP estimating takeoffs that keep those zones and disciplines separable so mechanical, electrical and plumbing quotes compare against the same measured boundaries in CAD.

Remote estimating for Canada projects. This page does not represent a local office.

Updated · F&K estimating methodology

In-suite counts must not swallow shared plant

Multi-unit residential bids fail when riser plant and parkade ventilation are averaged into per-suite allowances. Shared equipment needs its own lines, and in-suite typicals need a multiplier that can break when one suite type revises. Condo corridor pressurisation and smoke-control interfaces often sit between trades; the workbook records the responsibility matrix instead of duplicating fans.

Provincial electrical and plumbing codes are adopted differently, and energy overlays can add controls hardware. F&K measures devices shown on the issued drawings and energy documents you provide. Code compliance certification stays with the design team and authorities. The written quote remains the scope authority, so undocumented extras are never implied by market custom alone.

What the takeoff can include

Mechanical systems

Measure plant, ductwork, piping and in-suite terminals by zone.

Electrical systems

Reconcile devices, lighting, panels and feeders with suite-type repetition where applicable.

Plumbing systems

Count fixtures and pipe by system, separating parkade drainage from in-suite rough-ins.

Shared interfaces

Flag sleeves, housekeeping pads and electrical feeds that cross trade boundaries.

Measurement and scope checks

MEP takeoff builds a zone matrix: parkade, podium, typical floors and penthouse or roof plant. Suite-type multipliers stay editable. CAD pricing uses your labour units. Taxes stay off quantity lines and appear only on priced summaries for the project province. The workbook also records open clarifications so a missing detail does not silently become a firm quantity. Where freight, customs or mobilisation affect industrial cash flow more than measured units, those cost inputs stay outside the quantity columns until you provide a quotation basis.

Illustrative in-suite versus parkade MEP split

A residential tower bid needs suite plumbing fixtures separated from parkade drainage.

Illustrative in-suite versus parkade MEP split
ZoneCount basisWorkbook treatment
Type A suites24 suites × 2 baths48 baths of in-suite fixtures and rough-in.
Type B suites12 suites × 1 bath12 baths listed on Type B lines.
Parkade drainage38 floor drainsShared drainage kept out of suite multipliers.

Illustrative multi-unit split only. Fire pump and generator packages would appear on dedicated equipment lines.

Deliverable, pricing basis and quote

MEP workbooks can be combined or discipline-specific. The quote states zone coverage, whether controls are included and CAD pricing basis. Typical delivery is 24–48 hours from complete MEP documents. Revision rounds after addenda reprice only the affected lines, and the fee for those rounds is confirmed before remeasurement starts. Send addenda as they arrive if you need mid-tender updates.

Explore our full mep estimating services scope

Questions about this scope

Can you measure mechanical only?

Yes. Electrical and plumbing can be excluded or limited to interface notes.

Do you include fire alarm?

Fire alarm is included only when the quote adds that system.

How are suite typicals revised?

Send the revised suite drawings; only the affected type multiplier and linked quantities are remeasured.

Can the workbook stay quantities-only through tender?

Yes. Many bid teams apply their own rates locally. Quantities-only delivery still includes assumptions, drawing references and an addenda log.

Official project references

Send your Canada tender documents

  • Mechanical, electrical and plumbing drawings with schedules.
  • Suite-type architectural plans for repetition checks.
  • Energy or controls documents when relevant.
  • Province, bid-close time and CAD rate inputs for priced returns.
Other estimating support for Canada

Request a quote for paid estimating or quantity takeoff services. Share your trade scope, project location and bid deadline. We confirm the fee and deliverables before work starts. Fields marked * are required.

Contact and project details
Choose your phone country and enter your local number. Or enter a full number starting with + and its country code, regardless of the country selected.

Project Drawings (optional)

PDF, CAD/BIM, Office, ZIP or image documents. Up to 5 files, 25 MB each; account limits also apply.

No drawings attached. This field is optional.

    Already have a sharing link? Paste it here instead of uploading. Grant access to info@fandkestimatings.us; do not include passwords.

    Upload only documents you are authorized to share. Privacy policy. This request does not opt you into marketing messages.

    Prefer to discuss the scope first, or having trouble with the form? Email your project details or discuss your project on WhatsApp. Include your project location, trade scope and bid deadline.

    Share Service: