F&K Estimatings Construction Estimating & Takeoffs

Maine Office of Community Affairs, Division of Building Codes and Standards

Maine Construction Estimates for Roof and Heating Replacements

F&K estimates Maine work from the drawings you send. There is no Maine office, no site walk, and no permit filing.

The 2021 Maine Uniform Building and Energy Code, effective 7 April 2025, is based on the 2021 IBC and 2021 IRC with Maine amendments. It is enforced primarily in the municipalities the statute covers, not as a story that every unorganized township runs a full permit counter. Check whether MUBEC applies to that town before treating a detail as mandatory.

Zones 6 and 7 and a long winter mean deep frost, snow load, and a short season for exterior concrete and roofing. Footing depth and foundation-wall height follow the local frost requirement. The Atlantic edge adds nor’easter and coastal-flood design where the site is exposed. Rocky excavation is a means-and-methods issue the drawings and geotech either describe or leave open.

The DOL table of January 1, 2023 lists a $50,000 threshold for Maine prevailing wage on covered public works. Rates come from the Bureau of Labor Standards schedule for the bid, not from the threshold. F&K measures remotely and does not keep a Maine crew on payroll for your job.

Procurement and labor notes for Maine

Maine state-funded public works should be reviewed for the project funding source and applicable construction-wage threshold. Project location, plans, specifications, and funding details are useful inputs before takeoff assumptions are fixed.

Maine procurement documents and public-authority instructions control the bid requirements. Use the current solicitation, drawings, specifications, alternates, addenda, and required forms for the project.

Maine publishes prevailing construction wage rates for state-funded public works estimated at $50,000 or more, and the applicable determination is attached to the bid documents. Verify the current project determination rather than using a generic rate.

Estimating services and trade scopes

Choose a measured takeoff if you plan to apply your own rates. For a priced bid estimate, agree on the trade boundaries, labor basis, supplier quotes and allowances with your estimator.

Roofing takeoff

For a Maine building with drift details and rooftop equipment, reconcile curb locations with the roof sections. Quantify insulation tapers, perimeter flashing and accessories separately for areas that use different assemblies.

HVAC estimating

For a Maine renovation with phased heating replacement, use the room and equipment schedules to distinguish each system and area. Keep temporary heat and restoration separately visible if the bid assigns them to mechanical work.

What to send and what to request

Bid drawings and inputs
Roof sections, equipment schedules, roof loading details and occupancy or shutdown plan.
Estimate deliverable
Roof layer and flashing workbook, equipment and distribution takeoff and winter phasing assumptions.
Request an estimate for a Maine project

Browse estimating services and trades

Find the drawings, quantities and deliverables for your scope. For a Maine project, share your bid documents so we can confirm which items belong in the quote.

Maine questions before a number is issued

Does MUBEC apply in every Maine town?

The code is written for the municipalities it covers, especially larger ones. Confirm the town. Do not assume an unorganized township is reviewing the 2021 IRC.

What is the Maine prevailing-wage contract size?

The January 2023 DOL chart lists $50,000. The wage rates are a separate schedule tied to the project.

Official references for Maine

Compare a marked-up quantity sheet in the sample library before sending a set.