Colorado local jurisdictions; Colorado Department of Labor and Employment for wages
Colorado Construction Estimating for Earthwork and Foundations
F&K estimates Colorado work from the drawings you send. There is no Colorado office, no site walk, and no permit filing.
Colorado does not adopt one IBC or IRC for every private building. Counties and municipalities choose the edition and the amendments. The state does set an energy-code floor, so envelope questions are not entirely local. The edition for a Denver job is not the edition for a mountain county.
A single IECC zone number would mislead here: the Front Range, the eastern plains, and the high country do not share a climate. Expansive clay and claystone along the Front Range show up as drilled piers, structural floors, or over-excavation when the geotech calls for them. Hail and foothill wildfire risk change roofing and exterior assemblies only when the drawings say so. Footing depth follows elevation.
There is no statewide general-contractor license to cite as a Colorado rule on this page. Permits are issued by the local building department. DOL’s January 2023 table sets a $500,000 threshold for state-funded public projects and says the law does not apply to CDOT work, while CDOT itself follows Davis-Bacon on its public projects. Do not treat that threshold as a wage for a private bid. Plan-based estimating, delivered remotely.
Procurement and labor notes for Colorado
Colorado’s construction conditions vary by elevation, climate, municipality, and project type. The estimate should use the site, geotechnical information, drawings, specifications, and jurisdiction identified for the project rather than a statewide code or cost assumption.
Colorado guidance identifies different solicitation paths for state agencies, higher-education institutions, transportation work, and local grant-funded projects. Review the owner’s solicitation, procurement method, bid package, and any alternates before measuring scope.
Colorado state public-project programs can include prevailing-wage and apprenticeship requirements, while federally funded programs may use Davis-Bacon determinations. The project funding and solicitation control which labor requirements apply.
Estimating services and trade scopes
Choose a measured takeoff if you plan to apply your own rates. For a priced bid estimate, agree on the trade boundaries, labor basis, supplier quotes and allowances with your estimator.
Sitework estimating
On a Front Range site with geotechnical over-excavation or fill requirements, define the earthwork limits from the civil sections. Carry excavation, unsuitable export and structural fill as separate quantities, with swell or shrink factors confirmed in the bid basis.
Concrete takeoff
If the Colorado structural drawings use drilled piers and a suspended slab, submit the pier schedule and under-slab details together. Keep pier lengths, grade beams, structural floor and temporary forming separated for pricing.
What to send and what to request
- Bid drawings and inputs
- Geotechnical report, grading contours, foundation sections, excavation limits and any issued shoring criteria.
- Estimate deliverable
- An earthwork balance showing cut, fill, import and export by material, with specified soil treatment and shoring broken out from the foundation quantities.
Browse estimating services and trades
Find the drawings, quantities and deliverables for your scope. For a Colorado project, share your bid documents so we can confirm which items belong in the quote.
Estimating services
- Construction Estimating
- Cost Estimating
- Quantity Takeoff
- Dedicated Estimator
- Commercial Estimating
- Residential Estimating
- Industrial Estimating
- Multi-Family Estimating
- Bid Consultation
- Project Management
- Quantity Surveyor
- Bid Management
- Material Procurement
- Plan Review
- Subcontractor Takeoff
- Institutional Estimating
- Value Engineering
Trade estimating and takeoffs
- Concrete Estimating
- Masonry Estimating
- Structural Steel
- Lumber Takeoffs
- Drywall Estimating
- Painting Estimating
- Flooring Estimating
- Roofing Estimating
- Insulation Estimating
- Doors & Windows Estimating
- Millwork Estimating
- MEP Estimating
- Electrical Estimating
- Plumbing Estimating
- HVAC Estimating
- Sitework Estimating
- Demolition Estimating
- Landscaping Estimating
- Fireproofing Estimating
- Waterproofing Estimating
- Metals Estimating
- Thermal & Moisture Protection
Colorado questions before a number is issued
Which building code edition should an estimate assume in Colorado?
The one adopted by the jurisdiction on the permit set. There is no single statewide IBC year for private buildings. Energy measures may still have to meet the state floor.
Does every Colorado public project carry prevailing wage?
The DOL chart limits the state law to state-funded projects over $500,000 and excludes CDOT from that statute, while noting CDOT’s separate Davis-Bacon practice. Read the solicitation.
Official references for Colorado
- DOL state prevailing-wage thresholds (January 1, 2023)
- ICC adoption updates
- Colorado Office of the State Architect — public project resources
- Colorado Department of Local Affairs — construction contract guidance
- Colorado state solicitations guidance
Compare a marked-up quantity sheet in the sample library before sending a set.