Delaware counties and municipalities; DNREC for the energy code
Delaware Construction Estimates for Drainage and Waterproofing
F&K estimates Delaware work from the drawings you send. There is no Delaware office, no site walk, and no permit filing.
Delaware does not publish one statewide building code. New Castle, Kent, and Sussex counties, and their cities, adopt the construction codes. What the state did adopt on a statewide basis is a 2024 IECC energy code, effective 11 April 2026, through DNREC. Keep the energy edition and the building edition as two lines in the estimate assumptions.
Zone 4 is the IECC placement. Winters are moderate, and the bay and ocean edges bring coastal flooding into foundation and lowest-floor decisions when the site is in a mapped flood zone. Frost is a moderate-depth issue, not a northern-plains issue.
The DOL table of January 1, 2023 lists $500,000 for new construction and $45,000 for alteration, repair, renovation, rehabilitation, demolition, or reconstruction. Delaware has no sales tax on material purchases. Contractors can still owe the state’s gross-receipts tax on their own receipts, which is not a line you add as sales tax on the customer’s material takeoff. F&K works from the uploaded set and has no Delaware location.
Procurement and labor notes for Delaware
Delaware public-work requirements use the county where the work is performed and the project’s funding and contract type. The project address and solicitation should therefore remain part of the estimating intake.
Delaware law requires public-work bids to be responsive to the plans, specifications, and stated criteria; some public-building procurements include a prospective-bidder meeting. Reconcile the full bid package and addenda before measuring scope.
Delaware identifies prevailing-wage thresholds for state-funded construction and bases rates on the county and craft. Confirm whether the project is covered and use the current Department of Labor rate information supplied for the solicitation.
Estimating services and trade scopes
Choose a measured takeoff if you plan to apply your own rates. For a priced bid estimate, agree on the trade boundaries, labor basis, supplier quotes and allowances with your estimator.
Sitework estimating
For a Delaware Bay or ocean-side project where the civil set identifies flood elevations, compare existing and proposed grades before measuring fill. Keep temporary water handling, permanent drainage and imported fill in distinct items where they are in the tender.
Waterproofing estimating
On a Delaware building with a below-grade enclosure, send the wall sections and penetration details. Distinguish horizontal and vertical membrane, termination bars and protection board so the below-grade scope can be reviewed independently.
What to send and what to request
- Bid drawings and inputs
- Civil drainage plan, geotechnical and water-table information, foundation sections and waterproofing specifications.
- Estimate deliverable
- Drainage item schedule, membrane areas and termination lengths, separately listed dewatering assumptions.
Browse estimating services and trades
Find the drawings, quantities and deliverables for your scope. For a Delaware project, share your bid documents so we can confirm which items belong in the quote.
Estimating services
- Construction Estimating
- Cost Estimating
- Quantity Takeoff
- Dedicated Estimator
- Commercial Estimating
- Residential Estimating
- Industrial Estimating
- Multi-Family Estimating
- Bid Consultation
- Project Management
- Quantity Surveyor
- Bid Management
- Material Procurement
- Plan Review
- Subcontractor Takeoff
- Institutional Estimating
- Value Engineering
Trade estimating and takeoffs
- Concrete Estimating
- Masonry Estimating
- Structural Steel
- Lumber Takeoffs
- Drywall Estimating
- Painting Estimating
- Flooring Estimating
- Roofing Estimating
- Insulation Estimating
- Doors & Windows Estimating
- Millwork Estimating
- MEP Estimating
- Electrical Estimating
- Plumbing Estimating
- HVAC Estimating
- Sitework Estimating
- Demolition Estimating
- Landscaping Estimating
- Fireproofing Estimating
- Waterproofing Estimating
- Metals Estimating
- Thermal & Moisture Protection
Delaware questions before a number is issued
Is the Delaware energy code the same document as the county building code?
No. Counties adopt building codes. The statewide energy adoption cited here is the 2024 IECC rule effective 11 April 2026. Record both.
Should material prices in Delaware include state sales tax?
Delaware has no state sales tax. Do not add one. Gross-receipts tax is a tax on the contractor’s receipts and is not a sales-tax add-on to a material list.
Official references for Delaware
- DOL state prevailing-wage thresholds (January 1, 2023)
- ICC adoption updates
- Delaware Code — Public Works Contracting
- Delaware Construction Enforcement — prevailing wage
Compare a marked-up quantity sheet in the sample library before sending a set.